Instructions / Assembly

OPERATION
DISCLAIMER
6
Intense heat from the cooker will burn away paint from parts of the frame and windscreen ashing. This will
cause a slight ‘odor’ for a few minutes during the initial use. The exposed steel will rust. Occasional care
must be taken to prolong the life of your cooker.
1. Store cooker in a cool dry place. DO NOT store outside exposed to weather. Storage of an appliance
indoors is permissible only if the cylinder is disconnected. If storing cooker indoors, detach and leave LP
cylinder outdoors. LP cylinders must NOT be stored in a building, garage or any other enclosed area.
2. For long term storage, cover the cast iron burner and the hose and regulator assembly in a plastic bag.
3.
Spiders and small insects have been known to spin webs inside the tube of the cast iron burner.
Obstructions in the tube interfere with the ow of air and gas through the burner. A clogged tube may result
in a re beneath the appliance. If this happens, remove the cast burner from the frame and clean the tube
with a stiff, bent wire or screwdriver. We also advise cleaning inside the top ports as well.
4.
DO NOT t a m p e r w i t h o r a t t e m p t r e p a i r s o n t h e b u r n e r s , f r a m e s , v a l v e s , o r L P c y l i n d e r s .
5. Always close LP cylinder valve rst after use. Always use and store LP cylinder in an upright position.
Store out of the reach of children. Never store or transport LP cylinders in occupied enclosures. If storing
cooker indoors, detach and leave LP cylinder outdoors.
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
PLEASE READ THE FOLLOWING CAREFULLY
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only and are not available individually
as replacement parts.
PRODUCT MADE IN CHINA