STATIONARY INDOOR CYCLING EXERCISE BIKE ITEM #96115 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Before using this exercise bicycle, it is essential that you read the entire user manual, including all warnings and safety instructions. You should also convey all such warnings and instructions to any other person using this exercise bicycle. Retain this user manual for future reference. SAFETY IMPORTANT: Attention User: This User’s Guide contains important information about the installation, operation and safe use of this exercise bicycle.
IMPORTANT SAFETY INFORMATION WARNINGS AND DISCLAIMERS XtremePowerUS claims no liability for any damage or injury that result from the use of the bicycle by persons who have not read and understood the cautions contained in this manual, or through any misuse of the unit. You are responsible for your safety while operating this bicycle. To receive maximum performance and satisfaction from the bicycle, it is important that you read and understand the safety precautions before using the bicycle.
ASSEMBLY 1. FOOT MOUNTING: Affix the rear wheel base with the provided fixing screws, tighten. FIXING SCREWS 2. CUSHION INSTALLATION STEP 1: Seat adjustment knob mounted on the top and bottom screw holes. Screw in 3-5 turns, then lift the seat tube, pull out the knob to adjust the hole, then tighten. ADJUSTMENT TUBE 3. CUSHION INSTALLATION STEP 2: The seat will move back and forth above the steel pipe. Install the cushion onto the lift with screws and tighten. SEAT TUBE SEAT ADJUSTMENT KNOB 4.
ASSEMBLY 5. HANDRAIL INSTALLATION: Install the handrails onto the adjustment knob. Mount on and line up with three screw-holes. Screw 3-5 turns, then lift the armrest tube, pull out the knob to adjust the hole, then tighten. DIGITAL SCREEN HANDLEBAR CENTRAL TUBE ADJUSTMENT KNOB 6.METER INSTALLATION: Seat adjustment knob mounted on the top and bottom screw holes. Screw in 3-5 turns, then lift the seat tube, pull out the knob to adjust the hole, then tighten. HEART RATE SENSOR 3.
OPERATION SCAN: Automatically shows the motion parameters TIME: Timer shows how long rider has exercised SPD: (SPEED) Shows the rider their current speed DIST: (DISTANCE) Shows the rider current mileage distance CAL: (CALORIES) Shows the rider their current calorie consumption ODO: (ODOMETER) Shows total distance travelled by the rider PUL: (PULSE) Displays the riders current heart rate FEATURES 1. Pressing any key signals the machine to start.
OPERATION Adjust the seat. When the pedal is at the lowest position, your leg should be almost, but not quite, straight. You shouldn’t have to strain or rock your hips to pedal. Your knees shouldn’t feel crunched when they’re at the top of the pedal stroke. With a recumbent bike, you adjust the seat forward and back, rather than up and down, but the principles are the same. Get to know the display panel. For instance, notice how many levels the bike has.
OPERATION PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
