Manualshelf

Instructions / Assembly

ManualsBrandsXtremepowerUS ManualsFire Pits18.5 in. x 33.5 in. x 22.5 in. 50,000 BTU Square Stainless Steel Propane Fire Pit Patio Heater with Weather Cover
12345678910
7
ASSEMBLY
7.
8. Connect the hose and regulator to the cylinder. The
propane gas and cylinder are sold separately. Use a
standard 20lb. propane cylinder only. Use this heater only
with a propane vapor withdrawal supply system. Storage
of an appliance indoors is permissible only if the cylinder is
disconnected and removed from the appliance. A cylinder
must be stored outdoors in a well ventilated area out of
reach of children. A disconnected cylinder must have dust
caps tightly installed and must not be stored in a building,
garage or any other enclosed area. The maximum outlet
gas supply pressure” 250psi, the minimum inlet gas supply
pressure: 5psi.
6.
The minimum hourly rating of 10000 BTU is required for a
heater for automatic operation at ratings less than full input
rating.
The pressure regulator and hose assembly supplied with
the appliance must be used. The installation must conform
with local codes, with national fuel gas code ANS Z223.1/
NFPA54, natural gas and propane installation code CSA
V149.1, or propane and handling code B149.2.