Installation Guide

10
MAINTENANCE
The lter assembly consists of three parts. A. Exhaust
Vent Shroud B. Lint Filter C. Exhaust Filter
Separate each of the above parts and clean the
individual pieces using a soft brush or vacuum
cleaner. DO NOT damage the lters.
Separate each of the above parts and clean the individual
pieces using a soft brush or vacuum cleaner. DO NOT
damage the lters.
CLEANING THE AIR INTAKE :
Removing the Air Intake Filter: Remove by pulling outward holding the lter housing by
the top and bottom.
Remove the lter inside the housing and clean using a soft brush or
vacuum cleaner.
Replace the lter housing by pushing upwards with your thumb until the
latch is secure.
TROUBLESHOOTING :