Installation Guide

6
INSTALLATION
4. Align hanging hooks and fasten screws tightly.
5. Install exhaust pipe as per Fig. 3
6. Using 3x16mm screws (provided) to x the outlet in
place rmly.
7. Using 4x12mm screws to x the 2 wall hanging bracket.
Fig. 4
8. With assistance, mount dryer on wall bracket. Fig. 5
The appliance shall not be exhausted into a chimney, a wall, a ceiling, an
attic, a crawl space or a concealed space of a building.
Only rigid or exible metal duct shall be used for exhausting.
The total length of exible metal duct shall not exceed 2.4m
Ceiling
Your dryer is shipped with the legs in the bag containing your user’s
guide. To install and adjust the levelling legs see the illustration below.
If the oor is uneven, adjust the legs, do not insert pieces of wood, or
any other objects under the legs. Adjust the height level of the legs
accordingly.
Place the dryer on a sturdy, at surface. If the dryer is placed on an
uneven or weak surface, noise or vibration will occur. Allowable is 1°.