Instructions / Assembly

OPERATION
3
OPERATION
1. Slowly open propane tank valve.
2. Press the knob and turn it counterclockwise
to the 90 degree ON position. When you
hear a click, observe the re. If it is already
lit, continue to press the RANGE KNOB for
3-4 seconds before letting hands out. Please
repeat the above ignition method.
OFF
OFF
OFF
ON
ON
ON
3. When the knob is turned to the 90 degree position, the repower is the maximum. You can continue to
adjust the repower counterclockwise or clockwise.
4. Turn the knob to the OFF position and you can extinguish the re.
NOTE: CONNECTING A NEW GAS SOURCE OR STOVE HAS NOT BEEN USED FOR A LONG TIME,
THERE MAY BE AIR INSIDE THE HOSE. YOU MAY NOT IGNITE THE STOVE AT THE FIRST TRY. AT
THIS TIME, THE OPERATION CAN BE REPEATED UNTIL THE AIR INSIDE THE HOLE IS EXHAUSTED.
NEVER PUT YOUR HEAD CLOSE TO THE BURNER WHEN IGNITING TO AVOID ACCIDENTS.
TROUBLESHOOTING
Range Knob
Hose &
Regulator
Burner
5. After ignition, adjust the damper inside the stove until slightly rounded, vigorous blue ames are produced.
6. If the burner does not ignite on the rst turning the knob, this may be due to air being trapped in the hose.
Simply turn the gas control knob back to OFF and try to ignite several more times until the ame ignites.
NOTE If the burner does not ignite on the rst turning the knob, this may be due to air being trapped in the
hose. Simply turn the gas control knob back to OFF and try to ignite several more times until the ame ignites.