Owner Manual

ManualsBrandsXtremepowerUS ManualsHot Tubs & Saunas82" H Solar Powered Plastic Freestanding Outdoor Shower and Footwash Spout

Table Of Contents

Blank Page

OWNER’S MANUAL AND SAFETY INSTRUCTIONS

10 GALLON POOL SOLAR SHOWER

ITEM # 75029

SAVE THIS MANUAL. KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATION, INSPECTION,

MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL, OR

THE MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO SERIAL NUMBER

FOR QUESTIONS, PLEASE CALL CUSTOMER SERVICE: 909.628.0880

Summary of content (5 pages)

PAGE 1
0 GALLON POOL SOLAR SHOWER ITEM # 75029 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL. KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATION, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL, OR THE MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO SERIAL NUMBER FOR QUESTIONS, PLEASE CALL CUSTOMER SERVICE: 909.628.
PAGE 2
SAFETY WARNINGS / ASSEMBLY Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in injury and/or property damage. Save all warnings and instructions for future reference. The warning and safety instructions in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when operating or cleaning tools and equipment.
PAGE 3
Screw in the connector piece inside the shower head base. Attach the shower head and screw into place. Screw in the faucet piece. Make sure the spigot part where water comes out is facing downward. Screw in the green gasket piece into the faucet. Connect the two shower body pieced and tighten them securely. Mount the shower base to concrete slab or wood base with four bolts, nuts and Attach the shower head assembly to gaskets. Using a Hex key and wrench. the shower body. Tighten securely.
PAGE 4
ASSEMLY / OPERATION ASSEMBLY Set up your solar shower in a place that is exposed to direct sunlight as long as possible. 1. Connect the shower head to shower body tube. Do not use a wrench. Secure the gasket. 2. Mount the shower base to concrete slab or wood base with four bolts, nuts and gaskets. Use a wrench for this process. 3. Connect the footwash to the shower. 4. Put an O-ring on the slot of the lower tube. Lift the shower upper tube on to the lower tube.
PAGE 5
DISCLAIMER PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.