eXtrending your Vision User Manual Introduction Dear customer, Thank you for choosing Xtrend. This user manual will assist you to install the Xtrend box successfully and to get familiar with numerous features. The Xtrend ET7500 and ET7000 is a new generation of Full HD Linux receiver with 2,000 DMIPS, 512MB DDR3, and an eSATAp port, which you can also use as an USB port. You can experience unlimited possibilities with the new Xtrend receivers.
eXtrending your Vision User Manual Table of Contents (A) Safety Instructions...................................................................................................................................3 (B) Main Features .........................................................................................................................................5 (C) Specification ..............................................................................................................................
eXtrending your Vision User Manual (A) Safety Instructions This Linux Set-Top-Box has been designed and manufactured in compliance with EU consumer safety requirements (CE). Please read the following safety precautions carefully. 1. Connecting Power ● This product operates only in the range of AC 100V~250V and 50Hz/60Hz. Please check first your power supply to see if it fits this range.
eXtrending your Vision User Manual 8. Lightening, Storm or Not In Use ● Unplug the product and disconnect the antenna cable during a thunderstorm or lightening, especially when left unattended and unused for a long period of time. This will prevent possible damages from power surges or lightening. 9. Replacement of Parts ● Unauthorized part replacements, especially by one who is not a qualified technician may result in damage to the product.
eXtrending your Vision User Manual (B) Main Features ET7000/ET7500 2,000 DMIPS CPU Processor 1 x integrated DVB-S2 Tuner (ET7000) 1 x integrated DVB-S2 Tuner and 1 x Plug & Play tuner slot for DVB-C, DVB-S2, or hybrid DVB-T2 Tuner (ET7500) Resolution: 1080p, 1080i, 720p, 576p, 576i Digital tone with AC-3-support via S/PDIF 12 Digit-Dot Matrix VFD (ET7500) eSATAp + USB Port in one (eSATAp Port provides power supply for external eSATA hard drives) 1 x Common Interface 1 x
eXtrending your Vision User Manual (C) Specification Property ET7000 ET7500 CPU 2,000 DMIPS 2,000 DMIPS Nand Flash 256MB 256MB DDR 3 512MB 512MB FRONT PANEL Display 2-LED VFD(dot Matrix) I/O PORTS USB 1 port 1 port SMART CARD 1 port 2 port CI SLOT X 1 port BUTTON 1 port 1 port(Touch/2led) IR 1 port 1 port Power Adapter (12V 2A) Adapter (12V 2A) CI SLOT 1 port X CVBS CVBS RCA AV Out Audio R/L Audio R/L S/PDIF OPTICAL OPTICAL Tuner 1xFixed 1xFixed + CPU/Memor
eXtrending your Vision User Manual (D) Packaging Contents (ET7000) Please check all package contents before using your product.
eXtrending your Vision User Manual Packaging Contents (ET7500) Or Please check all package contents before using your product.
eXtrending your Vision User Manual (E) Product Descriptions Front Panel (ET7000) 1. Power : Sets your Xtrend box into standby mode 2. 2 LED : Red LED will be displayed when booting/ Green LED will be displayed during operation 3. Smartcard reader slot: Insert a Smartcard 4.
eXtrending your Vision User Manual Product Descriptions Front Panel (ET7500) 1. Power : Sets your Xtrend box into standby mode 2. Display: Displays the current menu information. 12 character dot matrix VFD. 3. USB : Connect a USB storage device 4. CI Module slot: Insert a CAM 5.
eXtrending your Vision User Manual Rear Panel (ET7000) 1. CI Module slot: Insert a CAM 2. On/Off Switch: Power on/off. 3. Power Input : Connect DC Power Adapter 4. TUNER : DVB-S/S2 integrated 5. Composite (CVBS, L, R) : Video/Audio connection via RCA 6. S/PDIF : Digital Output 7. e-SATAp : Connect external E-SATA device or USB-storage device 8. Ethernet Port : Connect LAN connection 10/100 Mbit 9.
eXtrending your Vision User Manual Rear Panel (ET7500) 1. TUNER B : Plug & Play Tuner Slot for DVB-C/T/T2/S/S2 2. TUNER A : Single Tuner DVB-S/S2 integrated 3. Ethernet Port : Connect LAN connection 10/100 Mbit 4. HDMI out : HDMI output to connect to your Television 5. e-SATAp : Connect external E-SATA device or USB-storage device 6. Composite (CVBS, L, R) : Video/Audio connection via RCA 7. S/PDIF : Digital Output 8. POWER input : Connect DC Power Adapter 9. On/Off Switch: Power on/off.
eXtrending your Vision User Manual (F) Smartcard Reader & CAM ET7000 provides a Smartcard Reader slot and ET7500 provides two Smartcard Reader slots. Insertion of Smartcard ① Open the door on the right.
eXtrending your Vision User Manual Insertion of CAM (Conditional Access Module) ET7000 & ET7500 provide a CI slot.
eXtrending your Vision User Manual (G) Remote Control -Type A (ET7000/ET7500) 0. Power: puts your Xtrend box to standby mode 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Mute: tone off/on Function: function button TV: zap to TV Mode Portal: ET-Portal Radio: zap to Radio Mode Number field One step backward/delete text One step forward/skip text Text: displays videotext Subtitle: displays subtitle Audio: select Audio Track Color buttons: Functional buttons that is defined respectively by the feature of menu.
eXtrending your Vision User Manual Remote Control - Type B (ET7000/ET7500) 0. Power: switch the receiver to stand-by mode. 1. 2. 3. 4. STB: switch the remote control to receiver mode. Number field < : Navigates left on the menu options or delete << : Fast Rewind 5. 6. 7. 8. 9. 10. 11. ▶ll : Play and Pause MENU: displays the main menu. Information: Displays the service information box. VOL +/-: Adjusts the audio volume. BACK: back to previous channel Mute: Mutes the audio.
eXtrending your Vision User Manual (H) Basic Installation This chapter explains the installation of the Xtrend box. For information about installing devices such as the satellite dish, LNB, see the corresponding manuals of the manufacturer. When installing a new device, please refer to this basic installation chapter. 1. Installation of Satellite dish or Cable/Terrestrial connection One of the first steps is to connect satellite cable(s) to STB in order to gain optimal signal quality.
eXtrending your Vision User Manual 2. Connecting the TV (and VCR) STB provides a variety of audio/video connection methods. A. Connecting TV via HDMI Cable Connect your ET7500/ET7000’s HDMI output with a HDMI Cable to your Television’s HDMI input.
eXtrending your Vision B. User Manual Television with RCA If you connect your Xtrend the box via audio / video (also called RCA) please follow the graphic shown below. The individual connections are color coded for both the TV and the Xtrend box. Note that if you use Component for connecting an additional audio output for the audio connection must be used. C. Dolby Digital amplifier The Xtrend box has an optical output (AC3). You can choose the Dolby Digital amplifier using an optical cable.
eXtrending your Vision User Manual (I) Replacing Tuner (For ET7500) The Xtrend ET7500 offers as standard a built-in DVB-S/S2 tuner with an additional tuner slot. The Plug and Play DVB-S/S2, DVB-C and DVB-T/T2/C tuners are all pluggable. To protect your Electronic from unwanted static discharges, they should be carefully handled only by the edge of the board. Instruction A. B. C. D. E. F.
eXtrending your Vision User Manual [Figure 2] [Figure 3] 21
eXtrending your Vision User Manual (J) Turn on Xtrend ET7000/ET7500 Wizard Guide The Wizard Guide will assist you to help configure the Xtrend ET7000/ET7500 in a simple way. Step 1. Choose Video input selection The first step of the wizard guide allows you to choose the desired Video input between HDMI, Scart, or YPbPr. (Fig. 1) After you select your desired video input, configure the corresponding video mode. (Fig.
eXtrending your Vision User Manual Step 2. Language Selection Xtrend provides various languages and here you can choose the main language for your Xtrend box. Use UP/DOWN key to scroll up and down to find the language you want. Use the OK button to confirm your choice. (Fig.3) Fig. 3 Step 3. Configuring Basic Setup Now the wizard guide will ask you to configure your internet connection as well as tuner setup.
eXtrending your Vision User Manual Step 4 Check the internet connection Please connect your Xtrend receivers with a LAN connection or a WiFi USB stick (optional). Then select "Check the Internet Connection". (Fig. 5) If the Internet connection is successfully initialized, you will see an IP Address with the following message: "Your internet connection is working (ip: xxx.xxx.x.xx)" (Fig. 6) Fig. 5 Fig.
eXtrending your Vision User Manual Step 5. Configuring Tuner A and Tuner B (ET7500 includes a Plug&Play Tuner B Slot) A. DVB-S/S2 Configuration Mode Using LEFT/RIGHT key, you can choose one of the following Configuration Modes: ● Not configured. ● Simple ● Loop-through to: mode to make the TUNER 1 be externally connected to the TUNER 2. ● Equal to: mode to use the same configuration as that of Tuner B.
eXtrending your Vision User Manual Fig. 8 C. DVB-T2 Configuration Mode Using LEFT/RIGHT key, you can choose one of the following Configuration Modes: ● Enabled ● Nothing connected Once you have set "Enabled" as a configuration, select the appropriate region for your DVB-T2 System and press the OK button (Fig. 9) Fig.
eXtrending your Vision User Manual Step 6. Automatic Scan & Manual Scan After you have configured the tuner(s), you can perform an automatic search or manual search on the desired tuner. (Fig. 10) Fig. 10 Select on which tuner you want to do an automatic or manual search. (Fig. 11) Fig.11 Manual Scan If you know well enough to configure each exact setting required for manual search of services, you can select manual scan as well. There are many parameter values that you need to configure as below.
eXtrending your Vision User Manual Fig. 12 Amongst other things, the below parameters are what you need to decide prior to performing manual scan. 1. Tuner You need to decide which tuner you want to use for manual scan. 2. System Here you have two options between DVB-S (SD) and DVB-S2 (HD). 3. Frequency You need to enter the exact frequency of the transponder that you want to scan. 4. Symbol Rate You need to enter the exact symbol rate of the transponder that you want to scan 5.
eXtrending your Vision User Manual Press “OK” to activate the manual scan. This will take some minutes. As the scan proceeds, you will see the progressive bar and the newly found services underneath. After an automatic or manual search, your Xtrend box is now ready for use. Press “OK” to continue. (Fig. 13) Fig. 13 (K) System Configuration – Network Setup [Menu -> Setup -> System -> Network] The ET7000/ET7500 is equipped with a standard 10/100Mbps Ethernet RJ 45 connector.
eXtrending your Vision User Manual Adapter settings Through this menu, you can set the basic Ethernet configuration. ● User Interface “YES” is used to activate the Ethernet. If you set this option at “NO”, the Ethernet will not work. ● Use DHCP “YES” is used to use DHCP (Dynamic Host Configuration Protocol). If you set this option at “YES”, it will automatically detect the correct IP address. “NO” is used when you want to use a certain fixed IP address.
eXtrending your Vision User Manual (L) Mounting HDD (For ET7500) Xtrend ET7500’s HDD bracket is designed to mount 2.5” HDD 1. 2. You can mount a 2.5” HDD using the already installed bracket in the image below. After inserting a 2.5” HDD on to the bracket, tighten 4 screws on the bottom side of the HDD bracket where 4 arrows are marked in the image below.
eXtrending your Vision 3. User Manual Insert the HDD bracket into the case of ET7500 as in the image below. Then tighten the 4 screws of the HDD bracket where 4 arrows are marked in the image below. 4. Connect the HDD Cable with your 2.
eXtrending your Vision User Manual (M) Download and Install Plugins [Menu -> Plugins -> Download Plugins] In order to download and install more Plugins, please go to the Plugin Browser and press the green button on your remote control. You will be able to see a list of available plugins and you can choose which plugins you want to download and install. After the installation of a plugin, we strongly recommend to restart the graphical user interface.
eXtrending your Vision User Manual (N) Copyright - GNU GPL GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
eXtrending your Vision User Manual TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
eXtrending your Vision User Manual In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
eXtrending your Vision User Manual 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
eXtrending your Vision User Manual HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM ‘AS IS’ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.
