Operation Manual

25
eXtrending your Vision
User Manual
Step 5. Configuring Tuner A and Tuner B (ET7500 includes a Plug&Play Tuner B Slot)
A. DVB-S/S2 Configuration Mode
Using LEFT/RIGHT key, you can choose one of the following Configuration Modes:
● Not configured.
● Simple
● Loop-through to: mode to make the TUNER 1 be externally connected to the TUNER 2.
● Equal to: mode to use the same configuration as that of Tuner B.
● Advanced: for an advanced user configuration, where you can setup Unicable LNB, C-band, motor, and
other settings.
We recommend using the “Simple” configuration mode with DiSEqC A / B or Single mode according to your
satellite system. Port A and Port B are set to Automatic so that the DVB-S2 tuner can automatically find a lock
on the corresponding satellite signal furnished. (Fig. 7)
Fig. 7
B. DVB-C Configuration Mode
Using LEFT/RIGHT key, you can choose one of the following Configuration Modes:
● Enabled
● Nothing connected
Please select „Enabled“ as configuration mode, then you can choose the following types for " Used serivce scan
type "
● Frequency steps
● Frequency bands
● Provider
We recommend "Provider" as "Used service scan type". Select the appropriate cable provider according to
your cable system and press the OK button on your remote control. (Fig. 8)