Instructions for Use
- 3 -
Devices Messages Me
9:55
Devices
056853326
9:55
Tap + to add a new device
Devices
Devices Messages Me
4
Start the Wi-Fi configuration following the in-App instructions or referring to below tutorial steps.
Using the supplied reset pin, reset the
device(please consult the user manual for more on
this)
Wait for the LED indicator to flash RED
Tap Next
Please reset the device
Install Doorbell
Next
9:55
Install Doorbell
Press the [Bell] button, and tap Next
Help
Next
9:55
Please follow the instruction manual to
power the device
Please stay near your router for the best signal
Install Doorbell
Next
9:55
1. Tap “+” to add device 2. Select Doorbell 3. Check power status 4. Activate the doorbell 5. Reset device
Select your Wi-Fi network
Change WiFi
Hide Password
Home
Password123
(Please select a 2.4G network, this device will not
work with 5G Wi-Fi networks)
Wi-Fi Setup
Next
9:55
Scan QR Code
Scan the QR code below with the
device at a distance of 5-8 inches.
A tone will be heard when
successfully scanned.
Help Next
9:55
Please stay near your router for the
best signal
Device Found!
Connecting device to network...
Registering device...
12%
connecting...
Connect Network
Operation
Next
9:55
Please remove all film from the lens. Tap
Next to show a QR code, and let your
device scan the code. Keep your phone 5-8
inches from the lens.
15~25cm
5~8 in
6. Input Wi-Fi password 7. Prepare Code Scanning 8.Generate QR Code 9. Wait for connection
10. Device Added