TM MOBILE LED LIGHT USER MANUAL LED-200B
THANK YOU FOR CHOOSING XUMA Introduction The LED-200B is a compact, durable, and versatile LED light set that is as useful at home as it is on the go. A variety of attachment options makes this a dependable accessory for travelers, smartphone photographers, or anyone who needs to illuminate their surroundings. The LED-200B is comprised of 48 LEDs capable of providing 46 lumens of evenly distributed light.
Contents include 1. 2. 3. 4. 5. 6. 7. 8. 4 LED light Colored filter 1/4”-20 slotted mounting stud Suction-cup mount Phone clip Shoe mount with 1/4”-20 threaded socket 3.
2 1 3 4 5 6 7 8 5
Precautions • Please read and follow these instructions, and keep this manual in a safe place. • Do not stare directly at the lights when they are powered on. • Make sure that this product is intact and that there are no missing parts. • Do not use in humid or wet environments. • Clean this product with only a soft, dry cloth. • All photos are for illustrative purposes only.
Turning On the LED Press the power button on the rear of the light once for high setting, twice for low setting, and three times for blink setting. If a warmer light is desired, place the colored filter over the LED display. Mounting the LED Laptop or Smartphone Slide the 3.5 mm plug mount onto the mounting rail, and plug it into the headphone jack of the computer or smartphone. Note: Plugging the mount into a 3.5 mm jack will not charge the light.
If the headphone jack is on the bottom of the phone, use the included phone clip. Slide the clip onto the LED’s mounting rail. Then slide the clip over the top of your phone with the open side to the screen. Camera, Boompole, and Smartphone Mount Slide the shoe mount onto the mounting rail. The mounting foot will slide into the cold shoe or hot shoe mount of a DSLR camera or camcorder.
Then screw the LED and shoe-mount assembly into an available socket on a smartphone mount or other device. The mounting stud can be loosened or removed by hand or with a screwdriver. Desktop or Wall 1. Slide the suction-cup mount onto the mounting rail. 2. Press the suction cup firmly against the surface where you want to mount the light. Charging the Battery Attach the light to a powered USB port. The LED indicator will glow red when the battery is charging.
Specifications LED count 48 Output 2W Color temperature 5600 K (3200 K with color filter) Input 5V/1A Illumination 46 lm / 50 lx (at 1 m) Bulb life 50,000 hr. Charge time 50 min. (USB) Illumination time 1 hr. (high mode), 4 hr. (low mode), 3 hr. (blink mode) Cable connectors USB Standard-A male, Micro-B USB male Cable length 10.5” (26.5 cm) Weight 1.6 oz. (45.4 g) Dimensions (H × W × D) 1.57” × 2.56” × 0.51” (4 × 6.5 × 1.
One-Year Limited Warranty This Xuma product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
