Specifications
COPYRIGHT ©2019 ALL RIGHTS RESERVED Xun Tong Tech TEL: + 86 75526675941 E-mail: nrf@freqchina.com
8
3.1.7. Factory default setting
Command ACK Instruction
AT+FADR OK+FADR
[Instance]
Send:AT+FADR
Return:OK+FADR
Description:The module will restart after 150ms,and recover all configuration to the default
setting.
*The command takes effect immediately.
3.1.8. Software reset
Command ACK Instruction
AT+RESET OK+RESET
[Instance]
Send:AT+RESET
Return:OK+RESET
Description:The module will reset and restart after 150ms,and retain all configuration.
*The command takes effect immediately.
3.1.9. Firmware version
Command ACK Instruction
AT+FWNM OK+FWNM=[Param]
[Param]
2 bytes information
[Instance]
Send:AT+FWNM
Return:OK+FWNM=0001
Description:Check the firmware version of the module.
*The command takes effect immediately.
3.2. Slave command
3.2.1. Advertise name
Command ACK Instruction
AT+NAME=[Param] OK+NAME
[Param]
Advertise name
[Instance]
Send:AT+NAME=XUNTONG
Return:OK+NAME