Specifications

COPYRIGHT ©2019 ALL RIGHTS RESERVED Xun Tong Tech TEL: + 86 75526675941 E-mail: [e-mail]
10
AT+ADST=[Index] OK+ADST
[Index]
0: stop advertising
1: start connectable advertisement
2: start non-connect advertisement
3: start low-power
connectable advertisement
4: start low-power
non-connect advertisement
[Instance]
Send:AT+ADST=0
Return:OK+ADST
AT+ADST=? OK+ADST=[Index]
[Index]ditto
[Instance]
Send:AT+ADST=?
Return:OK+ADST=0
Description:Set or check the advertisement type,the default setting is connectable
advertisement.
*Command takes effect immediately in the non-connected state, and the configure is saved
after AT+RESET command is used.
*In connected state,command takes effect after disconnected,and the configure is saved
automatically.
3.2.4. Slave data service UUID
Command ACK Instruction
AT+SSERN=[Param] OK+SSERN
[Param]
16 bytes UUID
[Instance]
Send:
AT+SSERN=69:40:00:01:B5:A3
:F3:93:E0:A9:E5:0E:24:DC:CA:99
Return:OK+SSERN
AT+SSERN=? OK+SSERN=[Param]
[Param]
16 bytes UUID
[Instance]
Send:AT+SSERN=?
Return:
OK+SSERN=69:40:00:01:B5:A3
:F3:93:E0:A9:E5:0E:24:DC:CA:99
Description:Set or check the BASE UUID of the slave’s service,the length of the UUID is 16
bytes, the default UUID is 69:40:00:01:B5:A3:F3:93:E0:A9:E5:0E:24:DC:CA:99.
*The command takes effect and be saved after AT+RESET command is used.