Specifications

COPYRIGHT ©2019 ALL RIGHTS RESERVED Xun Tong Tech TEL: + 86 75526675941 E-mail: [e-mail]
11
3.2.5. Slave TX characteristic UUID
Command ACK Instruction
AT+SCHAT=[Param] OK+SCHAT
[Param]
16 bytes UUID
[Instance]
Send:
AT+SCHAT=69:40:00:02:B5:A3
:F3:93:E0:A9:E5:0E:24:DC:CA:99
Return:OK+SCHAT
AT+SCHAT=? OK+SCHAT=[Param]
[Param]
16 bytes UUID
[Instance]
Send:AT+SCHAT=?
Return:
OK+SCHAT=69:40:00:02:B5:A3
:F3:93:E0:A9:E5:0E:24:DC:CA:99
Description:Set or check the UUID of the slave’s TX Characteristic,the length of the UUID is
16 bytes, the default UUID is 69:40:00:02:B5:A3:F3:93:E0:A9::E5:0E:24:DC:CA:99.
*The command takes effect and be saved after AT+RESET command is used.
3.2.6. Slave RX characteristic UUID
Command ACK Instruction
AT+SCHAR=[Param] OK+SCHAR
[Param]
16bytesUUID
[Instance]
Send:
AT+SCHAR=69:40:00:03:B5:A3
:F3:93:E0:A9:E5:0E:24:DC:CA:99
Return:OK+SCHAR
AT+SCHAR=? OK+SCHAR=[Param]
[Param]
16bytesUUID
[Instance]
Send:AT+SCHAR=?
Return:
OK+SCHAR=69:40:00:03:B5:A3
:F3:93:E0:A9:E5:0E:24:DC:CA:99
Description:Set or check the UUID of the slave’s RX Characteristic,the length of the UUID is
16 bytes, the default UUID is 69:40:00:03:B5:A3:F3:93:E0:A9:E5:0E:24:DC:CA:99.
*The command takes effect and be saved after AT+RESET command is used.