Specifications

COPYRIGHT ©2019 ALL RIGHTS RESERVED Xun Tong Tech TEL: + 86 75526675941 E-mail: [e-mail]
13
used for sending data to mobile device.)
*The command takes effect and be saved after AT+RESET command is used.
3.2.9. Slave RX configuration Characteristic UUID
Command ACK Instruction
AT+SCHCR=[Param] OK+SCHCR
[Param]
16bytesUUID
[Instance]
Send:
AT+SCHCR=7F:51:00:06:B5:A3
:F3:93:E0:A9:E5:0E:24:DC:CA:9
9
Return:OK+SCHCR
AT+SCHCR=? OK+SCHCR=[Param]
[Param]
16bytesUUID
[Instance]
Send:AT+SCHCR=?
Return:
OK+SCHCR=7F:51:00:06:B5:A3
:F3:93:E0:A9:E5:0E:24:DC:CA:9
9
Description:Set or check the UUID of the slave’s RX configuration characteristic UUID,the
length of the UUID is 16 bytes, the default UUID is
7F:51:00:06:B5:A3:F3:93:E0:A9:E5:0E:24:DC:CA:9E.(The TX configuration characteristic is
used for receiving configuration from mobile device.)
*The command takes effect and be saved after AT+RESET command is used.
3.3. Common Command
3.3.1. Switch mode enable
Command ACK Instruction
AT+STRD=[Index] OK+STRD
[Index]
0:disable
1:enable
[Instance]
Send:AT+STRD=0
Return:OK+STRD
AT+STRD=? OK+STRD=[Index]
[Index]ditto
[Instance]
Send:AT+STRD=?