Specifications

COPYRIGHT ©2019 ALL RIGHTS RESERVED Xun Tong Tech TEL: + 86 75526675941 E-mail: [e-mail]
14
Return:OK+STRD=0
Description:If enable, the mode of the module can be switched between Transmission Mode
and Command Line Mode.The default setting is “disable”.
*The command takes effect and be saved after AT+RESET command is used.
3.3.2. Switch Transmission Mode to Command Line Mode
Command ACK Instruction
AT++++ OK+CMD
[Instance]
When recent mode
is
Transmission Mode
Send:AT++++
Return:OK+CMD
Description:Switch the working mode from Transmission Mode Command Line Mode.The
command can not be used until the data exchange has been stopped for 200ms.
*The command takes effect immediately.
3.3.3. Switch Command Line Mode to Transmission Mode
Command ACK Instruction
AT+ENRT OK+ENRT
[Instance]
When recent mode
is
Command Line Mode
Send:AT+ENRT
Return:OK+ENRT
Description:Switch the working mode from Command Line Mode to Transmission Mode.
*The command takes effect immediately.
3.4. Extended function command
3.4.1. Encryption
Command ACK Instruction
AT+EYPT=[Index-1,Index-2] OK+EYPT
[Index-1]
0: disable
information encryption
1: enable
Information encryption
[Index-2]
0: enable passkey
1: disable passkey
[Instance]
Send:AT+EYPT=0,0