Specifications

ManualsBrandsXUNTONG ManualsElectronicsRS485 CLOUD MODULE

RS485 Cloud Communication Assembly

1 Scope

The assembly is designed to the application scenarios of KohlerKonnect, it works as a bridge

unit between Kohler intelligent devices and upper network devices, such as intelligent gateway

or router

2 Related Standards

2.1 Wi-Fi: in compliance with 802.11b/g/n，WEB，WPA/WPA2，PSK/EnterPrise

2.2 Bluetooth: in compliance with BQB certificate

2.3 RF: in compliance with EN300328

2.4 EMC: in compliance with EN301489-1 and EN301489-17)

2.5 CE/CB/FCC certificated

2.6 In compliance with RoHS directives

3 Specification

3.1 Operation Conditions

3.1.1 Operation temperature: -10℃～55℃

3.1.2 Operation humidity: below RH98%

3.1.3 Storage temperature: -40℃～71℃

3.2 Supply Voltage: DC 11V – DC 13V

3.3 RF signal strength

Bluetooth:

Transmitter： -1.14dBm@BLE

Receiver： > -96dBm

Wi-Fi:

Transmitter： 16.28dBm@11b，16.70Bm@11g，16.79dBm@11n

Receiver：-87~-76dBm@11b，-87 ~-65dBm @11g，-85~-64dBm @11n

4 Outline structure and Electrical Interface

Wire Color

HW Label

I/O

Description

White Wire

RS485_A

RS485_A(3.3V)

Blue Wire

RS485_B

RS485_B(3.3V)

Red Wire

12V

Power

Black Wire

GND

Summary of content (4 pages)

PAGE 1
RS485 Cloud Communication Assembly 1 Scope The assembly is designed to the application scenarios of KohlerKonnect, it works as a bridge unit between Kohler intelligent devices and upper network devices, such as intelligent gateway or router 2 Related Standards 2.1 Wi-Fi: in compliance with 802.11b/g/n，WEB，WPA/WPA2，PSK/EnterPrise 2.2 Bluetooth: in compliance with BQB certificate 2.3 RF: in compliance with EN300328 2.4 EMC: in compliance with EN301489-1 and EN301489-17) 2.5 CE/CB/FCC certificated 2.
PAGE 2
5 Features of Assembly 5.1 General Features 5.1.1 OS of mobile devices Android4.4.2 or IOS8.0 5.1.
PAGE 3
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
PAGE 4
ii. During manufacturing process of the integrated device, the module is soldered onto the pcb of the integrated device. iii. The antenna is integral PCB trace Antenna and maximum gain is 2 dBi for WiFi and 0dBi for BT. This module has been approved by FCC to operate with the antenna types with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. iv.