User manual

106 X100 Series Main User Manual
INSTALL & CONNECT SETUP CONFIGURERECORDING SOFTWARERECORDING SOFTWARE
4.5.5 NOTIFICATION TAB
The Notification Tab is used to configure Email and Alarm notifications. Click on NOTIFICATION Tab:
SMTP Config.
Key-in the SMTP server connection information for sending Event Notice Emails.
- SERVER: Enter the SMTP provider’s IP address or DNS.
- PORT: Enter the Mail Server’s SMTP port.
- USER NAME: Enter the SMTP server’s user account.
- PASSWORD: Enter the SMTP server’s password.
- FROM: Enter the ‘from’ field for the Email.
- ACCOUNT AUTHENTICATION: Check this box if the SMTP server needs authentication
- SECURE CONNECTION (SSL): Check this box if the SMTP server requires SSL authentication.
- SEND TEST: Click button to send a test email.
FTP Config.
(See overleaf for details)
Send to List
Select the contact mail
accounts for sending
Schedule Record
Notification Emails.
SMTP Config.
(See below for details)
Mail Setings
Insert the Subject
and Body (Message)
text in these fields
for when Email
Notifications are
sent out.
Alarm Config
(See overleaf for details)
Contact No1 [e-mail]
Contact No2 [e-mail]
Click OK to Save changes
Click CANCEL to exit without saving details