User manual

X100 Series Main User Manual 107
INSTALL & CONNECT SETUP CONFIGURE RECORDING SOFTWARERECORDING SOFTWARE
Alarm Config:
Configure the rules of Event Notice Emails.
- PRE-ALARM: Set how many snapshot pictures should be captured before an Event is triggered.
- POST-ALARM: Set how many snapshot images should be captured after an Event is triggered.
- SNAPSHOT INTERVAL: Set the interval between of each snapshot.
- SEND INTERVAL: Set the interval between of each sent out notice Email.
- PICTURE TEMP FOLDER: Select a default folder for storing snapshot pictures, these pictures will delete automatically
when the system is shutdown.
FTP Config:
Configure the FTP Server details for the system to upload images when an Event is triggered.
- FTP SERVER: Enter the FTP site’s IP address.
- PORT: Enter the FTP server’s port.
- USER NAME: Enter the account to login FTP server.
- PASSWORD: Enter the password for login FTP server.
- PATH: Enter the path to the defined folder the system will use to upload images
- ALLOW CREATE FOLDER: If ticked, the system will create a folder automatically for every new event’s upload
process. If left un-ticked, the system will only upload images to defined folder.