User manual

130 X100 Series Main User Manual
INSTALL & CONNECT SETUP CONFIGURERECORDING SOFTWARERECORDING SOFTWARE
5. Assign the time period you want to playback.
- Either drag the mouse over the required time period,
- OR choose a time period by entering a START and END TIME manually:
- The selected time period will highlight in BLUE on the Results List.
6. Select the cameras to playback by ticking the boxes on the left hand side.
- Select a maximum of 16 cameras to playback.
7. Click OK to finish searching and start playback on the main screen(s).
8. Use the Control buttons to PLAY, PAUSE, REWIND, FORWARD and STOP playback.
- In PAUSE mode, you can use the and (Next/Previous Frame buttons) to jump frame by frame.
- You can also use the Playback Bar to control the playback position by dragging the cursor to the required area.