User manual

X100 Series Main User Manual 39
INSTALL & CONNECT SETUP CONFIGURE RECORDING SOFTWARE
6. On the next page in the LAN menu, configure your User Name and Password. (We recommend that
the default User Name and Passwords are left as they are until your camera has been configured.
The password security can be set up and changed later).
- To Change the User Name and Password, tick the box and enter your User Name and Password as required
- To go back to the previous window without saving any changes, click
- To save all the details, click
EDIT YOUR WIRELESS SETTINGS for X100C and X104P Wireless IP Cameras
All other IP cameras in the X100 Series are WIRED ONLY and these settings cannot be applied to them
(go to Step 10 on page 41 to continue with WIRED setup).
7. Click WIRELESS to change your wireless connection settings.
- You will need your Wireless Network and Security settings for this
- To go exit or go back to the previous window without saving any changes, click
- To move to the next window click
- To save your changes click from the second settings window.
SETUP
Note: The default User Name is ‘admin’; the default password is blank (meaning there is no password set up).
Select your preferred network
type; either Static IP or DHCP IP
Configure your Wireless
Security Mode using the
drop down menu.