User manual

44 X100 Series Main User Manual
INSTALL & CONNECT SETUP CONFIGURERECORDING SOFTWARE
2.5 ACCESS YOUR CAMERA USING YOUR WEB BROWSER
1. Open your web browser
2. Type in your camera’s IP address in the format: http://192.168.0.100
- If you have set up your own IP address, replace 192.168.0.100 with the new address.
- The Login Window of the IP Camera will pop up as shown.
3. If you are logging in for the FIRST TIME input the following default details:
User Name: admin
Password:
- Leave the PASSWORD field blank
- Depending on your browser’s security settings, the Web page may prompt a ‘Security Warning’ window. If so,
select YES to install and run the ActiveX control on your PC, otherwise the system will load the ActiveX silently.
- After the ActiveX control has installed and is running, the camera image will be displayed as shown.
SETUP
ADMINISTRATOR / USER LOGIN
If you log in the Camera as the Administrator, you can perform all the settings provided by the device.
If you log in the Camera as a general User, the SETTING function will not be accessible.