User manual

X100 Series Main User Manual 51
INSTALL & CONNECT SETUP CONFIGURE RECORDING SOFTWARECONFIGURE
http://xx.xx.xx.xx/ or http://xx.xx.xx.xx:xxxx/ to access the IP camera.
- If multiple IP cameras are installed on the LAN and are also required to be accessed from the WAN, then the HTTP
Port can be assigned as the virtual server port mapping to support multiple devices.
- Click OK to save and enable the setting.
WIRELESS TAB for X100C and X104P Wireless IP Cameras
- Using a wired connection ensures greater secrecy while making changes.
- You will need your Wireless Network and Security settings for this.
- These settings should always be made in the camera first and secondly in the wireless access point. This ensures
that the device is always accessible when making changes.
WIRELESS SETTINGS CAN BE CONFIGURED USING EASY INSTALLATION OR MANUALLY.
Setting (Easy Installation)
Provides a 2 step procedure to configure your wireless settings
1. Select the SSID (known as the ‘public name’) of the wireless router or Access Point (AP).
- Click on SUBMIT once selected.
Use for manual
configuration of
wireless settings
Use for ‘Easy
Installation’