User manual

56 X100 Series Main User Manual
INSTALL & CONNECT SETUP CONFIGURERECORDING SOFTWARE CONFIGURE
STREAMING TAB
RTSP (Real Time Streaming Protocol) is a streaming control protocol used to establish and control
multimedia streams. RTSP can be considered a ‘remote control’ for controlling the media stream
delivered by a media server. RTSP servers typically use RTP as the protocol for the actual transport of
audio/video data.
RTSP Port
Choose the RTSP port. The RTSP protocol allows a connecting client to start a video stream. Enter the
RTSP port number to use. The default value is 554.
RTP Port
Specify the range of transmission port number of video stream. The default range is 50000 to 50999.
User can specify a number between 1024 and 65535.
UPnP TAB
What is UPnP?
UPnP™ is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and other peripherals. The X100 IP range of
cameras and video server are UPnP enabled devices. If your operating system is UPnP enabled, the
device will automatically be detected and a new icon will be added to ‘My Network Places’. If you do
not want to use the UPnP functionality, it can be disabled.
In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT traversal when
your device is located on an intranet (LAN) and you wish to make it available from the other (WAN) side
of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the
NAT router will be forwarded to the device.
