User manual

X100 Series Main User Manual 7
INSTALL & CONNECT SETUP CONFIGURE RECORDING SOFTWARE
The following are the minimum system requirements for the X100 Series IP Camera Range:
Network Environment Wired Models Wireless Model (X100C, X104P)
Network Interface: 10/100MBase-TX Ethernet 10/100MBase-TX Ethernet
802.11b/g or n WLAN
Browser: Internet Explorer 6.0, Safari 5.0, FireFox 3.5 or later
System Hardware
CPU: Pentium 4, 2.0 GHz or higher
Memory: 512 MB or above
VGA Card Resolution: 1024 x 768 or above
Sound Card: for 2 Way Audio function (optional depending on model)
System Requirements for Viewing and Recording Software
Estimated Total
Display and
Recording FPS:
QVGA 120 120 to 360 360 to 540 540 to 960 960+
VGA 30 30 to 90 90 to 135 135 to 240 240+
SXGA 8 8 to 23 23 to 34 34 to 60 60+
CPU:
Intel P4
2.4GHz
Intel P4
3.2GHz
Intel
Pentium D
950
3.4GHz
Intel Core 2
Duo
E8600
3.3GHz
Intel Core
2 Quad
Q9650
3.0GHz
RAM: 512 MB 1 GB 2 GB
Display:
1024 x 678 resolution or above
DirectX 9.0c or above
Intel 945G/965G or above
OS:
Windows XP,
Windows Vista*
Windows 7
Hard Drive: Minimum 60GB recommended
For Multi-channel recording, use 7200rpm or higher speed HDD
Ethernet: 100 MBps 1 GBps
Chipset: Intel 945 or Intel 965 or above
*When using Vista it is recommended that extra memory is installed
iii MINIMUM SYSTEM REQUIREMENTS