User manual

X100 Series Main User Manual 79
INSTALL & CONNECT SETUP CONFIGURE RECORDING SOFTWARECONFIGURE
TCP SERVER TAB
Send event messages to a specified TCP server by setting the parameters here.
Name
Specify one or multiple TCP servers as required
- You will need to specify a Name for each TCP setting.
TCP Server
Type the server name or the IP address of the TCP server.
- Use the TEST button to check whether the TCP server account is working or not.
TCP Port
Set Port number of TCP server.
Add, Modify, Delete
Click ADD to add the completed TCP setting to the list.
To change any settings, select the TCP name and click MODIFY.
To delete an FTP setting, select the TCP name and click DELETE.
