User manual

8 X100 Series Main User Manual
INSTALL & CONNECT SETUP CONFIGURERECORDING SOFTWARE
iv NOTES ON INSTALLATION
• Please unpack all boxes carefully and identify that all the parts are present.
• Do not aim the camera at the sun or similar intense light.
• Treat the camera with care.
• Do not open the camera to make internal adjustments unless instructed to do so in this manual.
• Avoid using the camera in very hot or very cold temperatures or in areas of high humidity (unless the
camera is designed for outdoor use).
• Ensure the camera is well ventilated. It should not be placed near heated devices such as radiators or
heat elements.
• The camera should be installed on a firm and solid surface. Wall or Ceiling mounting the camera should
be done with care to ensure the camera weight can be supported safely.
• Do not cut the camera cables, this will void the warranty.
• Only use the supplied power adaptor. Using a different adaptor may cause the camera to malfunction,
heat up or catch fire. Any damage cause to the camera by using the incorrect power adaptor will void
the warranty.
• Do not tamper or open the power adaptor supplied.