User manual

X100 Series Main User Manual 83
INSTALL & CONNECT SETUP CONFIGURE RECORDING SOFTWARECONFIGURE
EXAMPLE 1
Send a file to FTP server by any motion triggered event, Always:
1. Type: Select EVENT trigger
2. Enable time: Start from 00:00 to 24:00, EVERY DAY
3. Trigger by: MOTION AREA
- Add Motion Detection Area in Object Detection menu
4. Action: SEND FTP
- Set parameters in Event Server menu > FTP Server Tab




EXAMPLE 2
Send a file to an Email server by any motion triggered event, Friday 18:00 to Saturday
06:00
1. Type: Select EVENT trigger.
2. Enable time: Start from Friday 18:00, duration for 12 hours, so it will stop on Saturday 06:00.
3. Trigger by: MOTION AREA
- Add Motion Detection Area in Object Detection menu
4. Action: SEND E-MAIL
- Set parameters in E-Mail menu
- To address: You need to input the receiver’s email address.
- Subject: You could specify the email subject as ‘Disturbance - Friday night’.
- Message: You could specify the email content with details of the IP camera location or any other detail that would
be useful if receiving the email.