User manual

6
TURNING THE SPEAKER POWER ON/OFF
1. In standby mode, tap the POWER button to turn on the unit, the power button
backlight will light up green and begin blinking slowly.
2. In power on mode, tap the POWER button to turn the unit off, the green power
button backlight turns off.
3. At power-on mode 5V DC-OUT is turn on and ready for charging your mobile
phone.
Note: Before first use, please charge the speakers for at least 4 hours because
the batteries may not fully charged, even though the charging LED lights.
BLUETOOTH OPERATION
Power on the unit and follow the directions below to use the A2DP profile Bluetooth
features of this unit.
Turn on the Bluetooth
In Bluetooth Off mode, press and hold the Bluetooth button for about 3 seconds until
a beep sound is heard and the Bluetooth button backlight flashes Red and Blue
alternatively. The Bluetooth is turned on.
In Bluetooth Off mode, press and hold the Bluetooth button for about 2 seconds until
the Bluetooth button backlight flashes red and a beep sounds. The Bluetooth is turned
on and the previously paired device is now re-linked with WOOMBOX.
Turn off the Bluetooth
In Bluetooth ON mode, press and hold the Bluetooth button and hold for about 5 seconds
until a beep sound is heard and the Bluetooth button backlight flashes one red and then
all lights go off. Bluetooth will turn off automatically if linking was not processed or the link
has been interrupted for over 5 minutes.
PAIRING (LINKING) A BLUETOOTH ENABLED MOBILE PHONE OR OTHER
BLUETOOTH ENABLED DEVICE TO THE WOOMBOX
1. With the power on and Bluetooth Off , press and hold the Bluetooth button for about 3
seconds until a second beep sound is heard, The Bluetooth button backlight will flash
blue and red.
2. The WOOMBOX is ready to pair (link) with your Bluetooth mobile phone or device.
3. Turn on the Bluetooth feature of your mobile phone and enable the search or scan
feature to find the " WOOMBOX ".
4. Select " WOOMBOX " from the device list when it appears on your screen. If required,
enter the pass code “0000” to pair (link) the unit with your mobile phone.
5. After successfully pairing (linking) with your mobile phone, you can play music from
your mobile phone wirelessly to the WOOMBOX.