User manual

8. You may also shut down Bluetooth by tapping Bluetooth button of the WOOMBOX for

5 seconds.

9. The WOOMBOX will automatically redial the last number you dialed by tapping the

PHONE button twice. A quick press on the Phone button will end the call in progress. A

short beep tone will be heard confirming the redialing is ended.

10. If your mobile phone is already paired with WOOMBOX but became unlinked even

with both Bluetooth devices turned on, you need to do nothing as the WOOMBOX will

re-link with the mobile phone automatically.

The Bluetooth button status indicator will blink two red with two short beeps if the

WOOMBOX and your mobile phone have been re-linked successfully.

11. To unlink, press and hold the Bluetooth button and hold for about 5 seconds until a

beep sound is heard and the Bluetooth button backlight flashes one red and then all

lights go off. Alternatively pressing Power button will do as well.

NOTE :

Re-link MICROBQX by using Bluetooth operation guided in Manual of your mobile phone

in case automatic re-linking failed.

PLAYING MUSIC USING THE AUXILIARY INPUT

The WOOMBOX features an auxiliary audio signal input jack for connecting external

audio devices like MP3 players, CD players, iPhones or iPods (except iPod shuffle 3

gen) and listen to them through the speaker of WOOMBOX.

1. Use the audio cable (included) with one 3.5 mm stereo plug on each end of the cable.

2. Plug one end into the AUX-IN jack on the WOOMBOX and the other end of the cable

into the Line-out Jack or Headphone Jack of your external audio device.

3. Tap the POWER button to turn on the WOOMBOX. The POWER button backlight

will turn green and begin flashing slowly.

4. Turn on your external audio device.

5. Press the VOLUME UP (+) / DOWN (-) button to adjust the desired volume level.

6. Operate all other functions on the auxiliary device as usual.