User manual

9
NOTES:
(1). If you’re connected to the Line Out Jack of your external device then you only
need to adjust the volume control on the WOOMBOX. If you’re connected to the
Headphone Jack of your external device, then you may need to adjust both the
volume control of your external device and the volume control on the WOOMBOX to
find the most desirable volume setting.
(2). If you use AUX IN function in Bluetooth on mode, Bluetooth audio will be
temporarily disconnected when the audio cable plugged in. Unplugging the audio
cable will resume Bluetooth audio. We suggest you turn off the Bluetooth to save
battery power when playing music via AUX IN mode.
(3). Tap the POWER button to turning off the system when you finish listening.
Don't forget to switch off the power of your external device as well.
RECHARGING WOOMBOX BATTERY
When you listen to music, the built-in rechargeable Li-Polymer battery will eventually
reach a low power condition. The power indicator will turn red and start flashing
quickly, so please charge the speaker battery as soon as possible.
1. Plug the unit into a USB port on your computer or into a DC 5V, 1000mA USB
power adaptor (not included) using the included USB cable.
2. Plug the DC plug of the cable into the WOOMBOX.
Charging in Power On mode
 The Red LED flashes quickly every second if battery is still at a low level.
 The Green LED will turn on and the Red LED slowly flashes Green
simultaneously if battery is charged up to a workable level.
 Both Green & Red LED lit solid if battery is fully charged.
Charging in Unit Power Off mode
 The Red LED turns on and starts flashing slowly.
 The Red LED lights solid when the battery is fully charged after charging for
about 4 hours.
NOTES:
1. Charging time will vary if you are listening to music while charging the speaker
battery. We recommend you switch off the speaker power during the charging
process or until the speaker batteries are fully charged.