INSTRUCTION MANUAL 6-71-075-004 REVISION A Autocirc® Instant Hot Water Pump Models E1-BCANCT1W-06 and E1-BCANRT1W-06
Note: If felt necessary, replace these existing flexible hoses with new stainless steel braided flexible hoses in the lengths required. Step 4 Screw on the two existing 1/2” hose connections to the corresponding hot and cold sides of the pump housing (see Fig. 4). Be sure not to “kink” these existing hose lines during bending which may prevent adequate flow and/or cause the valves to break.
Xylem Inc. 3878 S. Willow, Suite 104 Fresno, CA 93725 Tel: (559) 265-4730 (800) 554-6853 Fax: (559) 265-4740 (800) 453-7523 www.xyleminc.com/brands/laingthermotech Laing Thermotech is a trademark of Xylem Inc. or one of its subsidiaries. © 2012 Xylem, Inc.
