Global Water 800-876-1172 • globalw.com Global Water Instrumentation, Inc.
Global Water 800-876-1172 • globalw.com Congratulations! Thank you for purchasing Global Water Instrumentation, Inc. Model AD200-1, the single channel voice dialer that can be incorporated into hard wired or wireless security systems or used as a stand-alone unit. This versatile dialer can be easily expanded to operate in conjunction with an alarm, temperature or water level sensor, or any other sensor that can provide the appropriate trigger.
Global Water 800-876-1172 • globalw.com I) AD200-1 Checklist a) b) c) d) One (1) ea. Model AD200-1 Automatic Voice Dialer One (1) ea. 7-foot, 2-conductor jacket telephone cable with RJ11 plug attached One (1) ea. 7-foot jacketed, 4 conductor power/alarm cable One (1) ea. Instructional Manual II) Inspection a) Your AD200-1 unit was carefully inspected and certified by our Quality Assurance Team before shipping. If any damage has occurred during shipping, please notify Global Water Instrumentation, Inc.
Global Water 800-876-1172 • globalw.
Global Water 800-876-1172 • globalw.com V) N.C.
Global Water 800-876-1172 • globalw.com VII) Programming the Dialer IMPORTANT: Before operating the AD200-1, make sure wiring is correct and power is set within specified limits. Recording and data recall can be performed without connection to a telephone line. We strongly recommend that final testing be performed under simulated alarm conditions, and that confirmation of transmission be obtained from the numbers dialed. a) Model AD200-1 stores and dials up to 4 telephone numbers and/or pager numbers.
Global Water 800-876-1172 • globalw.com “PROGRAM” mode. If it is not, press the MODE (“M”) button to change modes. c) To store telephone numbers in memory locations 1 through 4 (see page 8 for pagers) 1. At the “PROGRAM: NUMBERS” prompt, press “1” (YES). 2. Press all the digits of the first number to be dialed. Check the LCD while programming to make sure the correct numbers are pressed. 3.
Global Water 800-876-1172 • globalw.com d) To store a pager number and numeric code 1. With the dialer at the “PROGRAM: NUMBERS” prompt, press “1” (YES). 2. Enter all the digits of the pager number to be dialed. Check the LCD to insure the correct numbers are pressed. 3. After inputting the entire pager number (1 + area code if needed), press the PROGRAM/PAUSE (“P”) button and hold it down for about 2 seconds. A “P” will appear in the LCD and this will pause the dialing sequence for 5 seconds. 4.
Global Water 800-876-1172 • globalw.com e) Programming Tone/Pulse and PBX 1. Press the “M” key until “PROGRAM: NUMBERS” appears in the LCD, then press “2”. 2. Press “1” (YES) at the “PROGRAM: T-LINE” prompt. 3. Press “1” (TONE) for touch tone phone service. Press “2” (PULSE) for pulse (rotary) phone service. 4. After selecting TONE or PULSE, the LCD will display “PROGRAM: PBX”. 5.
Global Water 800-876-1172 • globalw.com 2. Press “1” (YES) at the “PROGRAM: DELAYS” prompt. 3. Press “1” (ON) for a 60 second Exit delay (This provides a 60 second exit delay, after the AD200-1 is set in the “OPERATE” mode, before the unit will react to a sensor trip, allowing time to exit). Press “2” (OFF) for no Exit delay (This will allow the unit, when set in the “OPERATE” mode, to react immediately to a sensor trip. 4. After selecting the Exit delay, the LCD should display “ENTRY DELAY”. 5.
Global Water 800-876-1172 • globalw.com 6. If you wish to change the OGM, repeat the preceding steps. The new OGM will automatically replace the previous message. VIII) Testing Your System a) To verify telephone numbers and OGM without phone line connection Follow these directions to ensure the correct telephone numbers have been properly stored and the recorded message satisfactory. 1. Press the “M” key until “TEST: T-LINE” appears. 2. Press “1” (YES). The LCD will display the T-LINE configuration.
Global Water 800-876-1172 • globalw.com 8. The AD200-1 will sequentially dial the programmed Locations (1-4). If there is no number stored in a location, it will be skipped. The OGM will be delivered when the AD200-1 receives an answer. (The OGM will not be played through the speaker.) For pager numbers, the pager code will be transmitted instead of an OGM. 9. The AD200-1 will automatically go through the next programmed location repeating the same process. c) The AD200-1 is now ready for operation.
Global Water 800-876-1172 • globalw.com IX) Specifications a) Dimensions Power source: 9-18VDC Current draw (OPERATE mode - Stand By): 28mA Current draw (OPERATE mode - Alarm): 100mA Activation: 1) N/C Activation: N/C to “open” latch input. Dialer resets with close. 2) Voltage Activation: Min. +5VDC. Max. +28VDC. Dialer resets with loss of activation voltage. Max. digits for outgoing number: 28 Operating temperature range: -18 to 55 C (0 to 130 deg F) Dimensions (inches): 6.0 x 4.0 x 1.
Global Water 800-876-1172 • globalw.com XI) Important Information/Maintenance a) Location Place the dialer on a flat level surface or mount the unit on the wall, away from extreme cold or heat, direct sunlight, excessive humidity and away from equipment that generates a strong magnetic field. Avoid placing near large metal objects and areas that produce smoke, dust or mechanical vibrations. b) Care Clean the housing with a soft cloth lightly moistened with water or mild detergent solution.
Global Water 800-876-1172 • globalw.com g) When calling for tech support, please have the following information ready; 1. 2. 3. 4. 5. Model #. Unit serial number. P.O.# the equipment was purchased on. Our sales number or the invoice number. Repair instructions and/or specific problems relating to the product.
Global Water 800-876-1172 • globalw.com XII) Warranty a) Global Water Instrumentation, Inc. warrants that its products are free from defects in material and workmanship under normal use and service for a period of one year from date of shipment from factory. Global Water’s obligations under this warranty are limited to, at Global Water’s option: (I) replacing or (II) repairing; any products determined to be defective. In no case shall Global Water’s liability exceed the products original purchase price.
