Instruction Manual

PAGE 29
Residential Water Systems
CentriPro
SERVICE FACTOR AMPS ALL MOTORS
AQUAVAR SOLO AND BALANCED FLOW REPAIR PARTS
(See Ecom website or PRP, Repair Part Price Book, for Current Prices)
Order Number Description
6K210 Gauge Guard - Transducer Protector
9K518 100 PSI Transducer 0.5 – 4.5V
9K519 200 PSI Transducer 0.5 – 4.5V
9K520 300 PSI Transducer 0.5 – 4.5V
9K523 10 Bar Transducer 0.5 – 4.5V (145 PSI)
9K524 SOLO and Balanced Flow Screw Repair Kit
9K525 SOLO and Balanced Flow Fan Repair Kit
9K545 10' Transducer Cable with Ground and GRN. Clamp
9K546 15' Transducer Cable with Ground and GRN. Clamp
9K547 25' Transducer Cable with Ground and GRN. Clamp
9K548 50' Transducer Cable with Ground and GRN. Clamp
9K549 100' Transducer Cable with Ground and GRN. Clamp
9K576 150' Transducer Cable with Ground and GRN. Clamp
9K577 200' Transducer Cable with Ground and GRN. Clamp
9K550 AquaBoost UIB
9K552 Balanced Flow and Aquavar SOLO UIB
9K575 Balanced Flow and Aquavar SOLO (all sizes) R05 Programmer
9K585 Water Sensor with Relay Contact
9K589 Over-Pressure Switch, 60-120 PSI, Balanced Flow or S-Drive
230 Volt 200 Volt
HP
1Ø 2-Wire 1Ø 3-Wire 3Ø 3Ø
CentriPro
1
Franklin Grundfos CentriPro Franklin Grundfos CentriPro Franklin Grundfos CentriPro Franklin
½ 4.7/4.7 6 6 6.3 6 6 N/A N/A N/A N/A N/A
¾ 6.4/6.2 8 8.4 8.3 8 8.4 3.9 3.8 N/A 4.5 4.4
1 9.1/8.1 9.8 9.8 9.7 9.8 9.8 4.7 4.7 N/A 5.5 5.4
1½ 11.0/10.4 13.1
2
13.1
2
11.1 11.5 11.6 6.1 5.9 7.3 7.2 6.8
2 N/A N/A N/A 12.2 13.2
2
13.2
2
7.6 8.1 8.7 8.8 9.3
3 N/A N/A N/A N/A N/A N/A 10.1 10.9 12.2 12 12.5
5 N/A N/A N/A N/A N/A N/A 17.5 17.8 19.8
2
20.2
2
20.5
2
1. CentriPro 2-Wire motors have Generation 1 and Generation 2 amp ratings, see motor nameplate or motor data sticker that was supplied with motor.
2. Amps are higher than controller overload range - use of these motors will current limit and provide reduced performance.