Owner's manual
2.0 Specifications
Maximum Working Pressure 150 psig / 10.4 bar (most models)
o o
Maximum Fluid Temperature 130 F / 54 C
o o
Ambient Temperature Range 14 to 110 F / -10 to 43 C
Duty Cycle Continuous
Maximum Viscosity 1,000 Centipoise
Maximum Suction Lift up to 30 ft. water
Power Requirements 108/130Vac 60Hz 40 Watts,
208/250Vac 40Hz 40 Watts,
208/250Vac 60Hz 45 Watts
Dimensions 6-1/8” H x 10-1/8” W x 9” D
Weight 12 lb.
Page 3
1.0 Introduction
Congratulations on purchasing the C-1100 Model-V Variable speed positive
displacement metering pump. The C-1100 is designed to inject chemicals
into piping systems and is capable of injecting against a high system
pressure up to 150 PSI (10.4 bar). In addition to the front mounted
mechanical flow rate adjustment, the C-1100 Model-V unit is equipped with
an external input control circuitry which allows the pumps output to be
externally controlled by either a 4-20mA input signal, a 0-10V DC input
signal or a pulsed input signal.
C-1100V
4.0 Unpacking
Your pump package should contain the following:
1 - Injector pump
1 - suction tube footvalve & strainer assembly
1 - ceramic tubing weight
1 - 5’ Length of clear PVC suction tubing
1 - 5’ Length of opaque LLDPE discharge tubing
1 - Injection fitting with internal back-flow check valve
1 - Mounting hardware kit
3.0 Features
!
Double-ball, springless ceramic check valves with PVDF (Kynar) body,
TFE/P (Aflas) and Viton o-ring seals.
!
Easy access, front mounted mechanical feed rate adjustment.
!
High outlet pressure capability of 150 psig (most models).
!
400:1 adjustment turn down ratio(speed and stroke combined).
!
Digital electronic feed rate control.
!
Corrosion proof Valox housing.
!
Tamper resistant electronic control panel cover.