User Manual

Operation
138
1 Press and hold down the <run/enter> key.
2 Press the <CAL> key.
3 Use <▲> <▼> to toggle between no and yes.
yes: reset measuring parameters.
no: retain settings.
4 Confirm with <run/enter>.
The instrument changes to the configuration para-
meters.
5 Toggle between no and yes by pressing <▲> <▼>.
yes: reset configuration parameters.
no: retain settings.
6 Confirm with <run/enter>.
The instrument changes automatically to the conduc-
tivity measuring mode.
Resetting
measuring
parameters
Resetting
configuration
parameters