MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Table of contents Introduction 3 Declaration of conformity 4 System overwiew 5 Basic setup 8 Preparations Use ................................................................................................................................... 9 ................................................................................................................................... 10 Appendix A 13 Installing Chatter Setup ...................................
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Introduction meet your requirements. To ensure the best result MJK recommends that the user reads this manual to become familiar with all features, Install and use the system as instructed by the manufacturer, MJK Automation ApS, to ensure reliable operation and accurate measurements. You can always get in touch with your supplier or with an MJK support hotline for advice and guidance: Area Phone e-mail Europe +45 45 56 06 56 mjk@mjk.
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Declaration of conformity Konformitetserklæring Vi, MJK Automation A/S, DK-2850 Nærum, påtager os det fulde ansvar for at produktet som denne erklæring angår, er i overensstemmelse med følgende standard(er) eller andre normdokument(er).
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 System overwiew 5
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 6
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 7
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Basic setup General The guide in Appendix A 13 describes this procedure.
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Preparations Push the cover to the right to open it. Make sure the SIM-card is positioned correctly, see the markings in the picture. Push the cover to the left to close it. Logger is for mounting on a tube. connect the antenna to the GPRS modem. The connector must 'click' in place. the ON position.
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Use Start the program Chatter Setup tool Click the button Start select Programs select MJK Automation select Chatter Setup select Setup Push the button Test SW and hold it until the LED next to the button is lit, see the marking in the picture to the tight. Click the button Search.
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Fill in the fields shown in the picture to the right.: ID Tag The name from the field ID Tag in the information form Appendix B 18 in MJK_SN The serial number from the field Serial nr. in the information form 18 in Appendix B Server Sync synchronize data with the database running on the server.
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 finished the registration with the server. Click the button Update Configuration the server to download its full configuration. This might take a couple of minutes. downloaded it's configuration from the server. Click the button Clear Log This deletes old measurements and alarms from the MJK This window is shown when the internal memory in the MJK Click the button Finish and answer Yes to terminate the program. Data Logger is powered off.
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Appendix A PC installation You must have administrator rights on the PC to install these programs 13
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Installing Chatter Setup Tool WorkstationSetup\Chatter Setup tool Chatter - Setup Tool Release 004.
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Installing .NET Framework 2 tool, you will need to install Microsoft :NET Framework 2 on your PC. The install file for Microsoft .NET 2.0 framework is on the MJK WorkstationSetup\.NET Framework 2 DK dotnetfx.exe Double-click the file in the folder and wait for this window to appear. Click the button Next You must accept the license agreement, Click the button Install > Wait while the installation continues Microsoft .NET 2.0 framework is installed.
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Installing Chatter USB driver WorkstationSetup\Chatter USB driver CDM20802_Setup.exe Double-click the file in the folder and wait for this window to appear. The window closes when the installation is done.
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Appendix B Information form WorkstationSetup\Chatter Setup tool DK_chatterInfoForm.pdf UK_chatterInfoForm.pdf The form fields can hold the following items: Field name Description Server IP address This address may be either a public or a private IP address. server IP-address will have to be a public IP-address. a MPLS-network, the server IP-address will have to be a private IP-address.
MANUAL GB CHATTER BASE SYSTEM SETUP TOOL 1303 Information form 18
1) The tissue in plants that brings water upward from the roots; 2) a leading global water technology company. We’re 12,000 people unified in a common purpose: creating innovative solutions to meet our world’s water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water efficiently, in their homes, buildings, factories and farms.
