User Manual

Cond 1970i Operation

ba75692e01 01/2007

4.6.3 PC/external printer (RS232 interface)

Via the RS 232 interface, you can transmit the data to a PC or an ex-

ternal printer.

Use the AK340/B (PC) or AK325/S (ext. printer) cable to connect the

interface to the devices.

The data output automatically switches to the RS232 interface.

Warning

The RS232 interface is not galvanically isolated.

When connecting an earthed PC/printer, measurements cannot be per-

formed in earthed media as incorrect values would result.

Set up the following transmission data at the PC/printer:

Socket assignment

4.6.4 Remote control

The measuring instrument can be remotely controlled from a PC. This

requires the KOM pilot communication kit. It is available as an acces-

sory.

The instrument is then controlled via commands that simulate key-

strokes and request the current display contents.

Note

A more detailed description is provided within the scope of delivery of

the communication kit.

Baud rate selectable between: 1200, 2400, 4800, 9600

Handshake RTS/CTS + Xon/Xoff

Parity none

Data bits 8

Stop bits 1

CTS

2 RxD

3 Ground

4TxD

RS 232

REC