User guide

Cond 3210 Operation
37
ba75794e01 01/2009
4.5.1 Manual storage
You can transmit a measurement dataset to the data storage as
follows.
If the storage is full The following window appears if all 200 storage locations are occupied:
You have the following options:
z To erase the entire storage, confirm Yes.
z To cancel the storage process and switch to the measured value
display, confirm No.
1 Press the <STO> key shortly.
The menu for manual storage appears.
2 If necessary, change and confirm the ID number (1 ... 10000)
with <▲><▼> and <ENTER>.
The dataset is stored. The meter switches to the measured
value display.
Data record: 4 From 200
30.10.2008 11:24:16
ӕ 1415 µS/cm 25.1 °C AR +++
C = 0.835 1/cm, Tref 25, nLF
ID number: 1
Continue
Manual data storage
22.09.2008
08:00
Back
Data storage full. Erase?
Yes
No
Warning
22.09.2008
08:00
Back