Manual

EBI 40
26
Deutsch
© Copyright by ebro Electronic GmbH
Firmware Update
Folgende Schritte sind für ein Update
notwendig:
- Versorgung abstecken sowie Batterie
entnehmen
- Taste „OK“ und „ESC“ gedrückt halten
- Versorgung wieder anlegen (LED blinkt /
Display ist aus)
- USB- Stick mit Firmware (File EBI40xxx.hex)
anstecken. Die xxx stehen für die Version,
wobei 123 der Version 1.23 entspricht.
- Warten bis das TFT Display aktiviert wird
-> Update erfolgreich
11
English Français
1340-6100 0411
Con guration by PC
There is a USB interface for connecting the
data logger with the PC. Any settings can be
con gured with the software Winlog.pro.
When the data logger is connected to the
PC it is impossible to use an USB-Stick.
Con guration by pressure keys
You can set language, time and date with
the pressure keys (further information P. 16)
Configuration par le biais de
l'ordinateur
Reliez l'appareil de mesure à l'ordinateur
via le port USB. Vous pouvez con gurer les
paramètres à l'aide du logiciel Winlog.pro.
Tant que l'appareil est connecté à
l'ordinateur, vous ne pouvez pas utiliser
de clé USB.
Configuration par le biais des
touches
Les touches vous permettent de con gurer
la langue, l'heure et la date. (cf. p. 16)