Manual

ManualsBrandsXylem ManualsEquipmentExpert MJK 1100-2100-3100

Manual

M275US0205

MJK Automation A/S

Byageren 7

DK-2850 Nærum

Denmark

Tel.: (+45) 45 56 06 56

Fax: (+45) 45 56 06 46

mjk@mjk.com

www.mjk.com

As our products are developed continuously we reserve the right to make any

change in the dimensions and the specifications.

Manual

MJK 1100 / 2100 / 3100

Submersible Hydrostatic Level Transmitters

Summary of content (4 pages)

PAGE 1
Manual MJK 1100 / 2100 / 3100 Submersible Hydrostatic Level Transmitters M275US0205 As our products are developed continuously we reserve the right to make any change in the dimensions and the specifications. MJK Automation A/S Byageren 7 DK-2850 Nærum Denmark Tel.: (+45) 45 56 06 56 Fax: (+45) 45 56 06 46 mjk@mjk.com www.mjk.
PAGE 2
Manual General Safety instructions Model 1100 Model 2100 Model 3100 Nominal pressure range 0 - 10 ft, 0 - 30 ft, 0 - 100 ft. Other ranges available; see data sheet. Nominal pressure range 0 - 10 ft, 0 - 30 ft, 0 - 100 ft. Other ranges available; see data sheet. Nominal pressure range 0 - 1 ft, 0 - 3 ft, 0 - 10 ft. Other ranges available; see data sheet. Level measuring with a pressure transmitter is done by immersing a transmitter in the liquid.
PAGE 3
Manual Mechanical mounting, Model 1100 1: Mount a suitable hook over the desired measuring location. Note the weight of the cable. Cable fitting 2: Remove the inner conical sleeve from the cable fitting and pull the cable through the outer part. Open the inner sleeve and fit it around the cable at the desired fixation point and press the inner sleeve into place in the outer part. Secure the cable fitting by pulling the cable downwards. 3: Lower the pressure transmitter into the wellpipe.
PAGE 4
Manual Designation of wires, cutting & stripping the cable The pressure transmitters are delivered with 39 ft of cable as standard (except 209940 and 209960: 120 ft). The cable can be lengthened with any type of cable using connection box 202922. Although the measuring signal is not sensitive to electrical noise, we recommend the use of a screened cable. Ensure that no moisture can enter the pressure compensation tube inside the cable.