Owner manual

Global Water
800-876-1172 • globalw.com
- 4 -
IV. FL16 Specifications:
Logger:
Power Supply: Two 9VDC Lithium batteries standard
8 VDC Min. to 24.0 VDC Absolute Maximum
Standby Current: 65uA Typical
Logging Current: 5mA Typical + sensor current
Operating Temperature Industrial, -40ºC to +85ºC (Battery may not apply)
Analog Sensor Inputs: 4-20mA
Resolution: 12-Bit, 4096 Steps
Level, temperature and battery voltage monitor
Sensor Warm-up Time: Programmable, 0-15 Seconds
Sample Modes: Fixed Interval: Programmable from 1 Sec. to >1 Year
High Speed: 10 Samples per second
Logarithmic Sample Rate (Approximation)
Exception (Log only on deviation from previous reading)
Storage Capacity: 81,759 Recordings of level, temp, battery voltage plus
date/time stamp
Communication Ports: FL16S: RS-232 4-pin circular connector
FL16U: USB Type B
Selectable Baud Rates:
9600, 19200, 28800, 38400, 57600, 115200
Housing: 1 7/8 diameter x 11 1/2 long, Stainless Steel and PVC
Weight: 450g (16oz), Logger only with batteries