User Manual

28
Deutsch FOM 320
4.3.1 Aktivieren einer Speicherstelle:
SET
Wählen Sie den gewünschten
Speicherplatz mit der »UP«- oder
»DOWN«-Taste und bestätigen Sie mit
der »ENTER«-Taste. Danach erscheint
der Menüpunkt „SET“. Drücken Sie die
»ENTER«-Taste erneut, um die
gewählte Speicherstelle zu aktivieren.
Danach ist das Gerät messbereit.
4.3.2 Auswahl einer Fettklasse:
FATCL
Hier können Sie den benötigten Öltyp
aus drei Typen wählen. Wählen Sie
den gewünschten Typ mit der »UP«-
oder »DOWN«-Taste und bestätigen
Sie mit der »ENTER«-Taste. Wählen
Sie nun den Menüpunkt „FATCL“ mit
der »UP«- oder »DOWN«-Taste. Im
Display erscheint der aktuell
eingestellte Öltyp für die gewählte
Speicherstelle.
Treffen Sie ihre Auswahl mit der »UP«-
oder »DOWN«-Taste und bestätigen
Sie mit der »ENTER«-Taste.
4.3.3 Einstellung der Startwerte der
Ölklassen zur Justierung:
FR PC
Hier können Sie die vorgegebenen
Startwerte der polaren Anteile (PC) von
frischem Öl ändern. Wählen Sie den
gewünschten Typ mit der »UP«- oder
»DOWN«-Taste und bestätigen Sie mit
der »ENTER«-Taste.
Wählen Sie nun den Menüpunkt „FR
PC“ mit der »UP«- oder »DOWN«-
Taste.
Manual FOM 320
29
Francais English
4.3.1 Activating a memory location:
SET
Select the desired memory location
with the »UP« or »DOW key and
confirm your selection with the
»ENTER« key. The menu item SET“
appears. Press the »ENTER« key
again to activate the desired memory
location. The unit is then ready for
taking measurements
4.3.2 Selecting a fat class:
FATCL
Here, you can select the required oil
type from three types. Use the »Uor
»DOWN« key to select the required
type, and confirm your selection with
the »ENTER« key. Now select the
menu item „FATCL“, using the »UP« or
»DOWN« key. The display shows the
oil type which is currently set for the
selected memory location.
Make your selection with the »UP« or
»DOWN« key and confirm it with the
»ENTER« key.
4.3.3 Setting the start values for the
oil class and adjustment:
FR PC
You can change the specified values
for the polar content (PC) of fresh oil
here. Select the desired type with the
»UP« or »DOW button and with
»ENTER«.
Now select the menu point „FR PC“
using the »UP« or »DOWN« button.
4.3.1 Activation d’un emplacement
mémoire: SET
Choisissez l’espace mémoire souhaité
avec la touche »UP« ou »DOW et
confirmez avec la touche »ENTER«.
Ensuite le menu „SET“ apparaît.
Appuyez de nouveau sur la touché
»ENTER« pour activer l’emplacement
mémoire choisi. L’appareil est
maintenant prêt pour le mesurage.
4.3.2 Sélection d’une catégorie de
graisse: FATCL
Vous pouvez choisir ici le type d’huile
dont vous avez besoin parmi trois types
d’huile. Choisissez le type souhaité
avec la touche »UP«- ou »DOW et
confirmez avec la touche »ENTER«.
Choisissez maintenant le menu
„FATCL“ avec la touche »UP« ou
»DOWN«. Le type d’huile inscrit
actuellement pour l’emplacement
mémoire choisi apparaît sur l’écran.
Sélectionnez avec la touché »UP«- ou
»DOWN« et confirmez avec la touche
»ENTER«.
4.3.3 Paramétrage des valeurs de
départ des divers types d’huile
comme ajustement: FR PC
Vous pouvez modifier ici les valeurs de
départ de polarisation (PC) de l’huile
fraîche. Sélectionnez le type souhaité
avec les touches «HAUT» ou «BAS» et
confirmez en appuyant sur la touché
«ENTER» Sélectionnez le point de
menu FR PC avec les touches «HAUT
» ou «BAS».