User guide

HandyLab 600 Settings
ba77064e01 03/2014 45
7.3.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values.
System / General / Con-
trast
0 ... 50 ... 100 % Changes the display contrast
System / General / Shutoff
time
10 min ... 1h ...
24 h
Adjusts the switch-off time
System / General / Tem-
perature unit
°C
°F
Temperature unit,
degrees Celsius or degrees Fahrenheit.
All temperature values are displayed with the
selected unit.
System / General / Stabil-
ity control
on
off
Switches on or off the automatic stability control
during measurement (see section 7.3.3 A
UTOMATIC
S
TABILITY CONTROL, page 46 )
System / Interface / Baud
rate
1200, 2400,
4800, 9600,
19200
Baud rate of the USB Device interface
System / Interface / Out-
put format
ASCII
CSV
Output format for data transmission
For details, see section 9 T
RANSMITTING DATA (USB
INTERFACE), page 55
System / Interface /
Decimal separator
Dot (xx.x)
Comma (xx,x)
Decimal separator
System / Interface / Out-
put header
Output of a header for Output format: CSV
System / Clock function Date format
Datum
Time
Settings of time and date.
For details, see section 4.4.5 E
XAMPLE 2 ON NAVIGA-
TION: SETTING THE DATE AND TIME, page 20
System / Service informa-
tion
Hardware version and software version of the meter
are displayed.
System / Reset - Resets the system settings to the default values.
For details, see section 7.4.2 R
ESETTING THE SYS-
TEM SETTINGS, page 48
Menu item Possible setting Explanation
Detailed information on the memory functions of the HandyLab 600
are given in section 8 D
ATA MEMORY, page 49.