Owner manual

HandyLab 680 Commissioning
19
ba77041e01 03/2014
3 Commissioning
3.1 Scope of delivery
 Meter HandyLab 680
 4 NiMH rechargeable batteries 1.2 V Mignon type AA
 USB cable (A plug on mini B plug)
 Power pack
 Short instructions
 Detailed operating manual (4 languages)
 CD-ROM
3.2 Power supply
The HandyLab 680 is supplied with power in the following ways:
 Battery operation with NiMh rechargeable batteries
 Mains operation with the supplied power pack.
The NiMh rechargeable batteries are automatically charged while
the power pack is connected.
 USB operation via a connected USB-B cable.
The inserted NiMh rechargeable batteries are not charged
3.3 Initial commissioning
Perform the following activities:
 Insert the rechargeable batteries and charge them
 Connect the power pack (mains operation / battery charging)
 Switch on the meter
 Set the date and time
3.3.1 Inserting the rechargeable batteries
1 Unscrew the two screws (1) on the underside of the meter.
2 Open the battery compartment (2) on the underside of the
meter.