Owner manual

HandyLab 680 Operation
35
ba77041e01 03/2014
System / General / Temperature
unit
°C
°F
Temperature unit,
degrees Celsius or degrees
Fahrenheit.
All temperatures are displayed
with the selected unit.
System / General / Stability control on
off
Switches on or off the auto-
matic stability control during
measurement (see section
4.4.3)
System / Interface / Baud rate 1200, 2400, 4800,
9600, 19200
Baud rate of the USB Device
interface
System / Interface / Output format ASCII
CSV
Output format for data trans-
mission
For details, see section 4.12
System / Interface / Decimal sepa-
rator
Dot (xx.x)
Comma (xx,x)
Decimal separator
System / Interface / Output header Output of a header for Output
format: CSV
System / Interface / Extended Oxi
output
The measured values for the
parameters concentration (mg/
l) and saturation (%) are output
together.
The function is active if the fol-
lowing requirements are met:
 A D.O. sensor is connected
 The D.O. sensor displays
the parameter concentration
(mg/l) or saturation (%)
 The Output format CSV is
selected
System /Clock function Date format
Date
Time
Settings of time and date.
For details, see section 4.3.5
System /Service information Hardware version and software
version of the meter are dis-
played.
System /Reset
- Resets the system settings to
the default values.
For details, see section 4.14.2
Menu item Setting Description