Owner manual

Operation HandyLab 680

ba77041e01 03/2014

Conductivity The following settings for conductivity measurements are reset to the

default settings with the Reset function:

The sensor settings are reset under the Reset menu item in the menu

for calibration and measurement settings. To open the settings, display

the required parameter in the measured value display and press the

<MENU/ENTER> key.

Setting Default settings

Cal. interval 150 d

Measured parameter

Cell constant (c) Depending on the connected

measuring cell:

0.475 cm

-1

(calibrated)

0.475 cm

-1

(set up)

0.100 cm

-1

Temperature compensation nLF

Reference temperature 25 °C

Temperature coefficient (TC) of the

linear temperature compensation

2.000 %/K

TDS factor 1,00