User Manual

37
Specifi cations
Diagnostics functions Sensor data
(Memosens only)
Manufacturer, sensor type, serial number,
operating time
Calibration data Calibration date, zero, slope
Device self-test Automatic memory test (FLASH, EEPROM, RAM)
Device data
Device type, software version, hardware version
Data retention Parameters, calibration data > 10 years
Nominal operating
conditions
Ambient temperature
Transport/ Storage
temperature
Relative humidity
–10 … +55 °C
–25 … +70 °C
0 … 95 %, short-term condensing allowed
Power Power supply Batterien 4x AA (Mignon) Alkaline oder Lithium
Operating time approx 1000 h (Alkaline)
Housing Material PA12 GF30 + TPE
Protection IP66/67 with pressure compensation
Dimensions approx (132 x 156 x 30) mm
Weight approx 500 g
Licensing - Compliance - Equipment safety
EMC EN 61326-1 (General Requirements)
Emitted interference Class B (residential area)
Immunity to interference Industry
EN 61326-2-3 (Particular Requirements for Transmitters)
RoHS conformity According to directive 2011/65/EC
Display Sensoface Gives you indications about the status of the
sensor, analysis of zero-point/slope, setting time,
frequency of calibration. Status indication (friendly,
neutral, sad)
Display LCD STN 7-segment display with 3 lines and icons
Status indicators
Battery power level
Notices Hourglass
Keypad
[on/off], [cal], [meas], [set], [], [], [clock]
*) User-defi ned
1) Ranges depending on Memosens sensor
2) According to EN 60746-1, at nominal operating conditions
3) ± 1 count
4) Plus sensor error