Instruction Manual

50
Data Logger
C o n fi guring the Data Logger
Prerequisite: The data logger is stopped (press meas).
Measurement
Measured value is maintained
Logger: CONT blinks
Logger: START blinks
Logger: DEL blinks
Logger: SET blinks
Logger: Current logger type
blinks
Select desired logger type using
:
DIFF, INT, DIFF+INT or SHOT.
Select the appropriate parameters using and confi rm each selection
by pressing set. When confi guration is fi nished, CONT blinks. You can start
the data logger by selecting START or CONT (see page 51).