Manual

80
Specifi cations
Display
User interface Straightforward menu navigation with graphic icons and detailed operating
instructions in plain text
Sensoface Gives you indications about the status of the sensor, analysis of zero-point/
slope, setting time, frequency of calibration. Status indication (friendly, neutral,
sad)
Grafi k Display QVGA TFT display with white backlighting
Status indicators For battery power level, logger
Hinweise Hourglass
Tastatur
[on/off], [meas], [enter], [], [], [], [], 2 context-sensitive softkeys
Diagnostics functions Sensor data
(Memosens only)
Manufacturer, sensor type, serial number,
operating time
Calibration data Calibration date, zero, slope
Device self-test Automatic memory test (FLASH, EEPROM, RAM)
Device data Device type, software version, hardware version
Data retention Parameters, calibration data > 10 years
Data logger 1x Micro USB-B for data transfer to PC
Data logger 10.000 Speicherplätze
Aufzeichnung: manuell, intervall- oder ereignisgesteuert
Cal data logger
MemoLog
(Memosens only)
Up to 100 Memosens calibration records can be saved
– Recording viewable on the display
– Directly retrievable via MemoSuite (USB)
Manufacturer, sensor type, serial no., zero, slope, calibration date
Communication USB 2.0
Profi le HID, installation without drive
Use Data exchange and confi guration via HandLab
Pilot software
RoHS conformity According to directive 2011/65/EC
Nominal operating
conditions
Ambient temperature –10 … +55 °C
Transport/ Storage
temperature
–25 … +70 °C
Relative humidity 0 … 95 %, short-term condensing allowed
Power Power supply Batterys 4x AA (Mignon), 4x Akku NiMH or
1x Li-Ionen-Akku, rechargeable via USB
Operating time approx 500 h (Alkaline)
Housing Material
PA12 GF30 + TPE
Protection
IP66/67 with pressure compensation
Dimensions
approx. (132 x 156 x 30) mm
Weight
approx. 500 g
Licensing - Compliance - Equipment safety
EMC EN 61326-1 (General Requirements)
Emitted interference
Class B (residential area)
Immunity to interference
Industry
EN 61326-2-3 (Particular Requirements for Transmitters)